Door Threshold and Trim Macro
1. General Description
Door objects can use this macro to draw their threshold and trims in 2D or 3D in ArchiCAD. The macro can manage the different kind of walls, eg. staright, trapezoid and curved walls.
2. Parameters
This macro has similar input parameters as a normal ArchiCAD door:
| Name | Type | Default | Scripts related to the parameter | Remarks | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | Length | 1 | 2D / 3D | Nominal width of the wall opening | ||||||||
| B | Length | 1 | 3D | Nominal height of the wall opening | ||||||||
| ZZYZX | Length | 1 | - | Not used | ||||||||
| AC_show2DHotspotsIn3D | Boolean | 0 | - | Not used | ||||||||
| origA | Length | 0 | "Original X Dimension" | |||||||||
| offsX | Length | 0 | 2D / 3D | Horizontal coordinate offset length | ||||||||
| offsY | Length | 0 | 3D | Vertical coordinate offset length | ||||||||
| bOpeningDir | Boolean | 0 | 2D / 3D | Opening Direction
|
||||||||
| gs_nominal | Boolean | 1 | 2D / 3D | Identifies the method as the macro handles the nominal opening sizes | ||||||||
| iWindowShape | Integer | 0 | 3D | Shape of the door
|
||||||||
| archHeight | Length | 0.25 | Height of the Arc. Only effective when iWindowShape = 1 |
|||||||||
| nArchResolution | Integer | 0 | 3D | Arc resolution for arched doors | ||||||||
| gs_door_frame | Title | --- | Door Frame | |||||||||
| iFrameStyle | Integer | 1 | 2D / 3D | Style of the Frame. Because the Threshold corelates with the Frame. |
||||||||
| gs_frame_wthk | Boolean | 1 | 2D / 3D | Is the thickness of the Frame equals with the Wall thicknes | ||||||||
| gs_fthk | Length | 0.1 | 2D / 3D | Frame Thickness | ||||||||
| gs_frame_thkin | Length | 0.1 | 2D / 3D | Frame Thickness Inside | ||||||||
| gs_frame_width | Length | 0.05 | 2D / 3D | Frame Width | ||||||||
| gs_ds_thk | Length | 0.05 | 2D / 3D | Door Stop Thickness | ||||||||
| gs_ds_w | Length | 0.025 | 2D / 3D | Door Stop Width | ||||||||
| gs_relate_w_m | Length | 0.012 | 2D / 3D | Relate Width | ||||||||
| gs_door_oversize | Title | --- | Oversize | |||||||||
| gs_left_oversize | Length | 0 | 2D / 3D | Left Opening Oversize | ||||||||
| gs_right_oversize | Length | 0 | 2D / 3D | Right Opening Oversize | ||||||||
| gs_upper_oversize | Length | 0 | 3D | Upper Opening Oversize | ||||||||
| gs_lower_oversize | Length | 0 | 3D | Lower Opening Oversize | ||||||||
| gs_door_panel | Title | --- | Door Panel | |||||||||
| gs_door_num_m | Integer | 0 | 2D / 3D | Leaf No. | ||||||||
| gs_leaf_thk | Length | 0 | 2D / 3D | Leaf Thickness | ||||||||
| gs_sidelight | Title | --- | Sidelight | |||||||||
| gs_sidelight_n_m | Integer | 0 | 2D / 3D | Sidelight No. | ||||||||
| gs_sl_w | Length | 0.3 | 2D / 3D | Sidelight Width | ||||||||
| gs_door_trim | String | "Off" | Trim side chooser | |||||||||
| iTrim | Integer | 1 | 2D / 3D | Identifies the Trims to be drawn on the window sides
|
||||||||
| gs_trim_oversize | Boolean | 0 | 2D / 3D / Parameter | Identifies the method as the macro handles the nominal opening sizes when Trims
are turned on.
|
||||||||
| gs_trim_width | Length | 0 | 2D / 3D / Parameter |
Width of the jamb extensions. If it's value is not 0, then gs_trim_width define the width of trims on each sides, instead of gs_trim_width_in and gs_trim_width_out.
|
||||||||
| gs_trim_width_in | Length | 0.025 | 2D / 3D / Parameter | Width of the interior jamb extensions. | ||||||||
| gs_trim_width_out | Length | 0.015 | 2D / 3D / Parameter | Width of the exterior jamb extensions. | ||||||||
| gs_trim_offs | Length | 0 | "Trim Offset" | |||||||||
| gs_trim_offset | Length | 0 | 2D / 3D / Parameter |
Trim Offset. If it's value is not 0, then gs_trim_offs define the offset of
trims on each sides, instead of gs_trim_offs_in
and gs_trim_offs_out.
|
||||||||
| gs_trim_offs_in | Length | 0.01 | 2D / 3D / Parameter | Trim Offset Inside | ||||||||
| gs_trim_offs_out | Length | 0.01 | 2D / 3D / Parameter | Trim Offset Outside | ||||||||
| gs_trim_thk_frame | Length | 0.025 | 2D / 3D / Parameter | Trim Thickness in case of gs_frame_wthk = 1 | ||||||||
| gs_trim_thk | Length | 0 | 2D / 3D / Parameter |
Thickness of the casing. If it's value is not 0, then gs_trim_thk define the thickness of trims on each sides, instead of gs_trim_thk_in and gs_trim_thk_out.
|
||||||||
| gs_trim_thk_in | Length | 0.025 | 2D / 3D / Parameter | Thickness of the interior casing | ||||||||
| gs_trim_thk_out | Length | 0.02 | 2D / 3D / Parameter | Thickness of the exterior casing | ||||||||
| gs_tw_left_in | Length | 0.05 | 2D / 3D / Parameter | Width of the interior casing on the left side. | ||||||||
| gs_tw_right_in | Length | 0.15 | 2D / 3D / Parameter | Width of the interior casing on the right side. | ||||||||
| gs_tw_top_in | Length | 0 | 3D | Width of the interior head casing. | ||||||||
| gs_tw_bottom_in | Length | 0 | 3D | Width of the interior casing on the bottom side. | ||||||||
| gs_tw_left_out | Length | 0.1 | 2D / 3D / Parameter | Width of the exterior casing on the left side. | ||||||||
| gs_tw_right_out | Length | 0.05 | 2D / 3D / Parameter | Width of the exterior casing on the right side. | ||||||||
| gs_tw_top_out | Length | 0 | 3D | Width of the exterior head casing. | ||||||||
| gs_tw_bottom_out | Length | 0 | 3D | Width of the exterior casing on the bottom side. | ||||||||
| bShowTrimInsideSplice | Boolean | 0 | 3D | Show or hide inside Trim's splice lines. | ||||||||
| bShowTrimOutsideSplice | Boolean | 0 | 3D | Show or hide outside Trim's splice lines. | ||||||||
| bShowJambExtension | Boolean | 1 | 2D / 3D | Show Jamb Extensions | ||||||||
| bMergeJambExtensions | Boolean | 0 | 2D / 3D | Make the Inside- and the Outside Trims from one piece | ||||||||
| gs_door_treshold | String | "" | Parameter | Threshold type chooser | ||||||||
| iTreshold | Integer | 1 | 2D / 3D / Parameter | Threshold type
|
||||||||
| gs_treshold_thk | Length | 0.012 | 3D | Threshold Thickness | ||||||||
| gs_treshold_nosing | Length | 0.025 | 2D / 3D | Extended Threshold Nosing | ||||||||
| gs_2D_representation | Title | --- | 2D Representation | |||||||||
| lod2D | Integer | 1 | 2D |
Level of Detail in 2D
|
||||||||
| gs_pen_2D | PenColor | 4 | 2D | 2D Contour Pen | ||||||||
| gs_open_2D | Angle | 90 | 2D | Door Opening Angle in 2D | ||||||||
| gs_trim_pen_cont | PenColor | 0 | 2D, 3D (Section View) |
Trim Contour Pen - If it is zero in 2D then gs_pen_2D
defines the cut contour pen.
If it is zero in 3D (Section View) then SYMB_SECT_PEN defines the cut contour pen. |
||||||||
| gs_wcont_line | Text | Off | Parameter | Wall Contour Line | ||||||||
| iWallContourLine | Integer | 0 | 2D | Wall Contour Line | ||||||||
| gs_wcont_line_in | LineType | 4 | 2D | Wall Contour Line Type Inside | ||||||||
| gs_wcont_line_out | LineType | 4 | 2D | Wall Contour Line Type Outside | ||||||||
| gs_wallhole_fill | FillPattern | 0 | 2D | Wallhole Fill Type | ||||||||
| gs_wallhole_pen_fg | PenColor | 0 | 2D | Walhole Fill Pen | ||||||||
| gs_wallhole_pen_bg | PenColor | 92 | 2D | Walhole Fill Background Pen | ||||||||
| gs_treshold_fill | FillPattern | 1 | 3D (Section View) | Threshold Fill Type - If it is zero in 3D (Section View) then SYMB_FILL defines the fill type of cut surfaces. | ||||||||
| gs_treshold_pen_fg | PenColor | 0 | 3D (Section View) | Threshold Fill Pen - If it is zero in 3D (Section View) then SYMB_FILL_PEN defines the fill pen of cut surfaces. | ||||||||
| gs_treshold_pen_bg | PenColor | 92 | 3D (Section View) | Threshold Fill Background Pen - If it is zero in 3D (Section View) then SYMB_FBGD_PEN defines the fill background pen of cut surfaces. | ||||||||
| gs_trim_fill_in | FillPattern | 5 | 2D / 3D (Section View) | Trim Fill Type Inside - If it is zero in 3D (Section View) then SYMB_FILL defines the fill type of cut surfaces. | ||||||||
| gs_trim_pen_fg_in | PenColor | 7 | 2D / 3D (Section View) | Trim Fill Pen Inside - If it is zero in 3D (Section View) then SYMB_FILL_PEN defines the fill pen of cut surfaces. | ||||||||
| gs_trim_pen_bg_in | PenColor | 39 | 2D / 3D (Section View) | Trim Fill Background Pen Inside - If it is zero in 3D (Section View) then SYMB_FBGD_PEN defines the fill background pen of cut surfaces. | ||||||||
| gs_trim_fill_out | FillPattern | 26 | 2D / 3D (Section View) | Trim Fill Type Outside - If it is zero in 3D (Section View) then SYMB_FILL defines the fill type of cut surfaces. | ||||||||
| gs_trim_pen_fg_out | PenColor | 4 | 2D / 3D (Section View) | Trim Fill Pen Outside - If it is zero in 3D (Section View) then SYMB_FILL_PEN defines the fill pen of cut surfaces. | ||||||||
| gs_trim_pen_bg_out | PenColor | 59 | 2D / 3D (Section View) | Trim Fill Background Pen Outside - If it is zero in 3D (Section View) then SYMB_FBGD_PEN defines the fill background pen of cut surfaces. | ||||||||
| gs_fillFr | FillPattern | 0 | 2D / 3D (Section View) | Frame Fill Type. It's used to the Jamb Extensions when bMergeJambExtensions = 1 |
||||||||
| gs_penFr_fg | PenColor | 0 | 2D / 3D (Section View) | Frame Fill Pen It's used to the Jamb Extensions when bMergeJambExtensions = 1 |
||||||||
| gs_penFr_bg | PenColor | 0 | 2D / 3D (Section View) | Frame Fill Background Pen It's used to fill the Jamb Extensions when bMergeJambExtensions = 1 |
||||||||
| gs_3D_representation | Title | --- | 3D Representation | |||||||||
| lod3D | Integer | 1 | 3D | Level of Detail in 3D - not used | ||||||||
| gs_frame_pen | PenColor | 2 | 3D | Frame Pen | ||||||||
| gs_window_material | Title | --- | Materials | |||||||||
| gs_trim_in_mat | Material | 0 | 3D | Interior Trim Material | ||||||||
| gs_trim_out_mat | Material | 0 | 3D | Exterior Trim Material | ||||||||
| gs_frame_mat | Material | 15 | 3D | Maretial of Jamb Extensions when bMergeJambExtensions = 1 | ||||||||
| gs_treshold_mat | Material | 0 | 3D | Threshold Material | ||||||||
| ac_details | Title | --- | AC Details | |||||||||
| ac_left_oversize | Length | 0 | 2D / 3D | Wallhole oversize on the left side | ||||||||
| ac_right_oversize | Length | 0 | 2D / 3D | Wallhole oversize on the right side | ||||||||
| ac_upper_oversize | Length | 0 | 2D / 3D | Wallhole oversize on the upper side | ||||||||
| gs_window_stack | Title | --- | Doors can be combined to form a large units. In this case the following parameters allows the user to turn off generating Trim, Sill and Board elements on the related sides | |||||||||
| gs_stack_left | Boolean | 0 | 2D | Connection on the Left | ||||||||
| gs_stack_right | Boolean | 0 | 2D | Connection on the Right | ||||||||
| gs_stack_top | Boolean | 0 | 2D / 3D | Connection on the Top | ||||||||
| gs_stDoorThresholdTrim | String | Parameter | One dimension Array parameter for receiving locale strings. |
Geometry parameters of Threshold and Trims
To clear the meaning of the geometry specific parameters used in the DoorThresholdTrim macro, refer to the following pictures:
Level of Detail in 2D
There are two level of detail programmed into the macro.
2D Representation
The following pictures explain the meaning of 2D attribute parameters.
3. Usage
Localization
The macro's default language is the English, but you can localize it with the gs_stDoorThresholdTrim parameter:
| Row | Default value | Description |
|---|---|---|
| 1 | Off | Value list item - gs_door_trim |
| 2 | Inside | Value list item - gs_door_trim |
| 3 | Outside | Value list item - gs_door_trim |
| 4 | Both Sides | Value list item - gs_door_trim |
| 5 | Off | Value list item - gs_door_treshold |
| 6 | Normal Threshold | Value list item - gs_door_treshold |
| 7 | Extended Threshold | Value list item - gs_door_treshold |
| 8 | Off | Value list item - gs_wcont_line |
| 9 | Inside | Value list item - gs_wcont_line |
| 10 | Outside | Value list item - gs_wcont_line |
| 11 | Both Sides | Value list item - gs_wcont_line |
| 12 | Trim Settings | UI String - tabpage name |
| 13 | Trim Position | UI String - static text - gs_door_trim |
| 14 | Trim Oversize | UI String - static text - gs_trim_oversize |
| 15 | Inside | UI String - static text |
| 16 | Outside | UI String - static text |
| 17 | Material Inside | UI String - static text - gs_trim_in_mat |
| 18 | Material Outside | UI String - static text - gs_trim_out_mat |
| 19 | Threshold Settings | UI String - tabpage name |
| 20 | Attributes - Threshold, Trim, Wall | UI String - tabpage name |
| 21 | Threshold Type | UI String - static text |
| 22 | Threshold Material | UI String - static text - gs_treshold_mat |
| 23 | Fill | UI String - title |
| 24 | Type | UI String - title |
| 25 | Pen | UI String - title |
| 26 | Backgr. Pen | UI String - title |
| 27 | Plan Symbol | UI String - title |
| 28 | Threshold | UI String - static text |
| 29 | Trim | UI String - static text |
| 30 | Inside | UI String - static text |
| 31 | Outside | UI String - static text |
| 32 | Contour Pen | UI String - gs_trim_pen_cont |
| 33 | Wall | UI String - title |
| 34 | Contour Line | UI String - gs_wcont_line |
| 35 | Cont. L. Type Inside | UI String - gs_wcont_line_in |
| 36 | Cont. L. Type Outside | UI String - gs_wcont_line_out |
Master Script
The door has to define the string tables for the gs_door_trim and gs_door_treshold parameters.
dim gs_stDoorThresholdTrim[] gs_stDoorThresholdTrim[11] = "" gs_stDoorThresholdTrim[ 1] = `Off` gs_stDoorThresholdTrim[ 2] = `Inside` gs_stDoorThresholdTrim[ 3] = `Outside` gs_stDoorThresholdTrim[ 4] = `Both Sides` gs_stDoorThresholdTrim[ 5] = `Off` gs_stDoorThresholdTrim[ 6] = `Normal Threshold` gs_stDoorThresholdTrim[ 7] = `Extended Threshold` gs_stDoorThresholdTrim[ 8] = `Off` gs_stDoorThresholdTrim[ 9] = `Inside` gs_stDoorThresholdTrim[10] = `Outside` gs_stDoorThresholdTrim[11] = `Both Sides`
For calling this macro from the 2D and 3D script, you have to identify the indexes of the selected items, in case of the gs_door_trim, gs_door_treshold and gs_frame_styleparameters.
! ============================================================================= ! Array index definitions ! ============================================================================= if gs_door_trim = gs_stDoorThresholdTrim[1] then iTrim = 1 ! Off if gs_door_trim = gs_stDoorThresholdTrim[2] then iTrim = 2 ! Inside if gs_door_trim = gs_stDoorThresholdTrim[3] then iTrim = 3 ! Outside if gs_door_trim = gs_stDoorThresholdTrim[4] then iTrim = 4 ! Both Sides if gs_door_treshold = gs_stDoorThresholdTrim[5] then iTreshold = 1 ! Off if gs_door_treshold = gs_stDoorThresholdTrim[6] then iTreshold = 2 ! Normal Threshold if gs_door_treshold = gs_stDoorThresholdTrim[7] then iTreshold = 3 ! Extended Threshold
! ========================================================================= ! Array index definitions ! ========================================================================= if gs_door_trim = gs_stDoorThresholdTrim[1] then iTrim = 1 if gs_door_trim = gs_stDoorThresholdTrim[2] then iTrim = 2 if gs_door_trim = gs_stDoorThresholdTrim[3] then iTrim = 3 if gs_door_trim = gs_stDoorThresholdTrim[4] then iTrim = 4 if gs_door_treshold = gs_stDoorThresholdTrim[5] then iTreshold = 1 if gs_door_treshold = gs_stDoorThresholdTrim[6] then iTreshold = 2 if gs_door_treshold = gs_stDoorThresholdTrim[7] then iTreshold = 3
Parameter Script
For implementing the parameter logic of the Trims, Sill and Board, you have to call this macro passing the following parameters.
! ===== Do Trim and Threshold Parameter Logic ===== call "DoorTresholdTrim" parameters gs_IsCurved = 0, iWindowShape = 0, ! rectangular Shape gs_frame_wthk = gs_frame_wthk, gs_frame_width = gs_frame_width, ! --- Trim --- gs_door_trim = gs_door_trim, gs_trim_oversize = gs_trim_oversize, gs_trim_width = gs_trim_width, gs_trim_width_in = gs_trim_width_in, gs_trim_width_out = gs_trim_width_out, gs_trim_offs = gs_trim_offset, gs_trim_offs_in = gs_trim_offs_in, gs_trim_offs_out = gs_trim_offs_out, gs_trim_thk_frame = gs_trim_thk_frame, gs_trim_thk = 0, gs_trim_thk_in = gs_trim_thk_in, gs_trim_thk_out = gs_trim_thk_out, gs_tw_left_in = gs_tw_left_in, gs_tw_right_in = gs_tw_right_in, gs_tw_left_out = gs_tw_left_out, gs_tw_right_out = gs_tw_right_out, ! --- Threshold gs_door_treshold = gs_door_treshold, ! --- Stacked Window gs_stack_left = gs_stack_left, gs_stack_right = gs_stack_right, gs_stack_top = gs_stack_top, ! --- 2D Representation gs_wcont_line = gs_wcont_line, ! --- String Resource --- gs_stDoorThresholdTrim = gs_stDoorThresholdTrim
2D Script
In the 2D Script the door has to contain the following code portion.
In addition it has to empty the transformation stack before calling this macro
(e.g. with a del top command)
if gs_wcont_line = gs_stDoorThresholdTrim[ 8] then iWallContourLine = 1 if gs_wcont_line = gs_stDoorThresholdTrim[ 9] then iWallContourLine = 2 if gs_wcont_line = gs_stDoorThresholdTrim[10] then iWallContourLine = 3 if gs_wcont_line = gs_stDoorThresholdTrim[11] then iWallContourLine = 4 ! ===== Draw Trim and Threshold ===== call "DoorTresholdTrim" parameters A = A, origA = A, offsX = 0, gs_IsCurved = gs_IsCurved, bOpeningDir = 0, gs_nominal = gs_nominal, ! --- Door Frame iFrameStyle = iFrameStyle, gs_frame_wthk = gs_frame_wthk, gs_fthk = gs_fthk, gs_frame_thkin = gs_frame_thkin, gs_frame_width = gs_frame_width, gs_ds_thk = gs_ds_thk, gs_ds_w = gs_ds_w, gs_relate_w_m = gs_relate_w_m, ! --- Door Leaf gs_door_num_m = gs_door_num_m, gs_leaf_thk = gs_leaf_thk, ! --- Sidelight gs_sidelight_n_m = gs_sidelight_n_m, gs_sl_w = gs_sl_w, ! --- Trim Parameters iTrim = iTrim, gs_trim_oversize = gs_trim_oversize, gs_trim_width = gs_trim_width, gs_trim_width_in = gs_trim_width_in, gs_trim_width_out = gs_trim_width_out, gs_trim_offs = gs_trim_offset, gs_trim_offs_in = gs_trim_offs_in, gs_trim_offs_out = gs_trim_offs_out, gs_trim_thk_frame = gs_trim_thk_frame, gs_trim_thk = 0, gs_trim_thk_in = gs_trim_thk_in, gs_trim_thk_out = gs_trim_thk_out, gs_tw_left_in = gs_tw_left_in, gs_tw_right_in = gs_tw_right_in, gs_tw_left_out = gs_tw_left_out, gs_tw_right_out = gs_tw_right_out, bShowJambExtension = 1, bMergeJambExtensions = 1, ! --- Threshold iTreshold = iTreshold, gs_treshold_nosing = gs_treshold_nosing, ! --- Stacked Window gs_stack_left = gs_stack_left, gs_stack_right = gs_stack_right, ! --- 2D Representation lod2D = lod2D, gs_pen_2D = gs_pen_2D, gs_open_2D = gs_open_2D, gs_trim_pen_cont = gs_trim_pen_cont, gs_wallhole_fill = gs_wallhole_fill, gs_wallhole_pen_fg = gs_wallhole_pen_fg, gs_wallhole_pen_bg = gs_wallhole_pen_bg, iWallContourLine = iWallContourLine, gs_wcont_line_in = gs_wcont_line_in, gs_wcont_line_out = gs_wcont_line_out, gs_trim_pen_fg_in = gs_trim_pen_fg_in, gs_trim_pen_bg_in = gs_trim_pen_bg_in, gs_trim_fill_in = gs_trim_fill_in, gs_trim_pen_fg_out = gs_trim_pen_fg_out, gs_trim_pen_bg_out = gs_trim_pen_bg_out, gs_trim_fill_out = gs_trim_fill_out, gs_fillFr = gs_fillFr, gs_penFr_fg = gs_penFr_fg, gs_penFr_bg = gs_penFr_bg, ! --- Oversize gs_left_oversize = gs_left_oversize, gs_right_oversize = gs_right_oversize
3D Script
In the 2D Script the door has to contain the following code portion.
In addition it has to empty the transformation stack before calling this macro
(e.g. with a del top command)
! ===== Draw Trim and Threshold ===== call "DoorTresholdTrim" parameters A = A, B = B, origA = A, offsX = 0, offsY = 0, iWindowShape = 0, gs_IsCurved = gs_IsCurved, bOpeningDir = 0, gs_nominal = gs_nominal, ! --- Door Frame iFrameStyle = iFrameStyle, gs_frame_wthk = gs_frame_wthk, gs_fthk = gs_fthk, gs_frame_thkin = gs_frame_thkin, gs_frame_width = gs_frame_width, gs_ds_thk = gs_ds_thk, gs_ds_w = gs_ds_w, gs_relate_w_m = gs_relate_w_m, ! --- Door Leaf gs_door_num_m = gs_door_num_m, gs_leaf_thk = gs_leaf_thk, ! --- Sidelight gs_sidelight_n_m = gs_sidelight_n_m, gs_sl_w = gs_sl_w, ! --- Trim Parameters iTrim = iTrim, gs_trim_oversize = gs_trim_oversize, gs_trim_width = gs_trim_width, gs_trim_width_in = gs_trim_width_in, gs_trim_width_out = gs_trim_width_out, gs_trim_offs = gs_trim_offset, gs_trim_offs_in = gs_trim_offs_in, gs_trim_offs_out = gs_trim_offs_out, gs_trim_thk = 0, gs_trim_thk_in = gs_trim_thk_in, gs_trim_thk_out = gs_trim_thk_out, gs_tw_left_in = gs_tw_left_in, gs_tw_right_in = gs_tw_right_in, gs_tw_top_in = gs_tw_top_in, gs_tw_bottom_in = gs_tw_bottom_in, gs_tw_left_out = gs_tw_left_out, gs_tw_right_out = gs_tw_right_out, gs_tw_top_out = gs_tw_top_out, gs_tw_bottom_out = gs_tw_bottom_out, bShowTrimInsideSplice = 0, bShowTrimOutsideSplice = 0, bShowJambExtension = 1, bMergeJambExtensions = 1, ! --- Threshold iTreshold = iTreshold, gs_treshold_thk = gs_treshold_thk, gs_treshold_nosing = gs_treshold_nosing, ! --- Stacked Window gs_stack_left = gs_stack_left, gs_stack_right = gs_stack_right, gs_stack_top = gs_stack_top, ! --- 2D Representation gs_trim_pen_cont = gs_trim_pen_cont, gs_trim_fill_in = gs_trim_fill_in, gs_trim_pen_bg_in = gs_trim_pen_bg_in, gs_trim_pen_fg_in = gs_trim_pen_fg_in, gs_trim_fill_out = gs_trim_fill_out, gs_trim_pen_fg_out = gs_trim_pen_fg_out, gs_trim_pen_bg_out = gs_trim_pen_bg_out, gs_fillFr = gs_fillFr, gs_penFr_fg = gs_penFr_fg, gs_penFr_bg = gs_penFr_bg, gs_treshold_fill = gs_treshold_fill, gs_treshold_pen_fg = gs_treshold_pen_fg, gs_treshold_pen_bg = gs_treshold_pen_bg, ! --- 3D Representation lod3D = lod3D, gs_frame_pen = gs_frame_pen, ! --- Materials gs_trim_in_mat = gs_trim_in_mat, gs_trim_out_mat = gs_trim_out_mat, gs_frame_mat = gs_frame_mat, gs_treshold_mat = gs_treshold_mat, ! --- Oversize gs_left_oversize = gs_left_oversize, gs_right_oversize = gs_right_oversize, gs_upper_oversize = gs_upper_oversize
UI Script
For implementing the user interface page into your object, just call the macro from the UI script.
if gs_wcont_line = gs_stDoorThresholdTrim[ 8] then iWallContourLine = 1 if gs_wcont_line = gs_stDoorThresholdTrim[ 9] then iWallContourLine = 2 if gs_wcont_line = gs_stDoorThresholdTrim[10] then iWallContourLine = 3 if gs_wcont_line = gs_stDoorThresholdTrim[11] then iWallContourLine = 4 trimTabpageIndex = 1 thresholdTabpageIndex = 2 attributesTabpageIndex = 3 call "DoorTresholdTrim" parameters iWindowShape = 0, iTrim = iTrim, iTreshold = iTreshold, iWallContourLine = iWallContourLine, gs_bFills = gs_bFills, idTab_TrimSettings = trimTabpageIndex, idTab_ThresholdSettings = thresholdTabpageIndex, idTab_Attributes = attributesTabpageIndex, gs_stDoorThresholdTrim = gs_stDoorThresholdTrim endif
