Shader: "wrapped brick bonds"

"wrapped brick bonds"

ClassDisplacement
Synopsis An extended wrapped brick pattern.
Arguments

"displacement amplitude" Description: The overall amount of displacement.
Default:0.04
Hint:-
"scale" Description: Overall scaling factor; increasing this value will make the pattern appear larger.
Default:1
Hint:[ 0.01, 1000 ]
"brick width" Description: The width of the bricks.
Default:1.0
Hint:-
"brick height" Description: The height of the bricks.
Default:0.5
Hint:-
"brick depth" Description: The depth of the bricks.
Default:0.7
Hint:-
"mortar size" Description: The amount of mortar between the bricks.
Default:0.1
Hint:-
"brick displacement" Description: The displacement of the bricks.
Default:0.5
Hint:-
"rough scale" Description: Determines the complexity of the roughness along the brick edges; values less than 1.0 produce a rougher appearance, and values greater than 1.0 a smoother appearance.
Default:1.0
Hint:-
"rough amplitude" Description: Determines the magnitude of the roughness along the brick edges, with values less than 1.0 corresponding to small variations, and values greater than 1.0 large variations.
Default:1.0
Hint:-
"bond" Description: Select standard bond type (pattern): 'Stretcher' (standard alternating pattern), 'Common' (bricks in every fifth row stacked crosswise), 'Flemish' (bricks placed crosswise alternately with normal in each row), 'English' (as 'Common', but with crosswise bricks every second row), 'Stack' (bricks are stacked directly on top of each other), 'Rowlock' (as 'Flemish' but bricks are placed on their sides).
Default:LI_BOND_STRETCHER
Hint:-
"fuzz" Description: Values close to 0.0 give sharp edges to the erosions, values closer to 1.0 give softer, fuzzier edges.
Default:0.5
Hint:-

Previous page alphabetically (wrappedbrickbonds)
Next page alphabetically (wrappedbrickdisplacement)
Index


Copyright © 2010 Lightwork Design Limited. All rights reserved